Buckleys International Testing Products

Call us on +44 (0)1303 278888

Dry Roof Pro' - Dry Flat Roof Leak Detector (DRP01)

Part Number: 6002-0069

Product Features

  • Compact and portable 
  • Simple to use 
  • Clear display and controls
  • Visual and audible alarm with volume control 
  • Automatic output voltage selector 
  • Accurate sensitivity control 
  • Compatible with older PD accessories 
  • Robust cast aluminium outer casing 
  • One year ‘back to base’ warranty 
  • CE approved

Buckleys’ Dry Roof Pro’ flat roof leak detector kits are ideal for rapid and effective testing of a wide range of non-conductive flat roof membranes and can test up to 2000m2 per day. 

Battery-powered and fully portable; the Dry Roof Pro’ detects an electrical path to earth through leaks and defects in non-conductive flat roofing finishes from 64μm to 25.6mm in thickness. 

As the electrode is ‘swept’ over the roof’s surface, any faults trigger the detector’s alarm system; alerting the user. 

The Dry Roof Pro’ contains everything required to start testing immediately, including an extensive range of accessories and electrodes; all supplied in a robust, foam-lined transit case. 

Complete kit includes: 

  • Dry Roof Pro’ detector unit, probe handle & interconnecting lead 
  • Drum brush electrode 
  • 4 x rechargeable D-cell batteries and charger 
  • 5m earth lead on reel 
  • 50m earth extension lead 
  • ESD anti-static wrist band 
  • 75mm pointed probe electrode 
  • 2 x 332mm insulated mid-section extension rod 
  • 1 x 332mm insulated end-section extension rod 
  •  450mm straight phosphor-bronze brush electrode (45° angled) 
  • Knurled thumb-nut & back nut (for electrode attachment) 
  • Test voltage calculator 
  • Carry bag with shoulder strap 
  • User instruction manual and calibration certificate 
  • Supplied in a robust, foam lined, high-visibility transit case
  • Output voltage range: 2 to 40kV DC
  • Alarm sensitivity range: 10 to 450μA (pre-set to 350μA)
  • Coating thickness range: 16μm to 25.6mm
  • Built-in test voltage formula: NACE SP0274
  • Unit weight: 1.64Kg
  • Unit dimensions: 172mm x 85mm x 235mm
  • Handle weight: 720g
  • Handle dimensions: 290mm x 85mm
  • Packed weight: 13.6kg
  • Dimensions (packed): 510mm x 250mm x 630mm 

 Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.

No questions are available at this time

Be the first to ask!



Straight Phosphor-Bronze Brush - 100mm (E104)

Straight Phosphor Bronze Brush Electrodes 100mm / 4" wide  ...

Straight Phosphor-Bronze Brush - 150mm (E106)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 200mm (E108)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 250mm (E110)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 300mm (E112)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor Bronze Brush - 350mm (E114)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 400mm (E116)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 450mm (E118)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 500mm (E120)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 700mm (E128)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 800mm (E132)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 1000mm (E140)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 45° - 100mm (E104A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

Straight Phosphor-Bronze Brush - 45° - 150mm (E106A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

Straight Phosphor-Bronze Brush - 45° - 200mm (E108A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 250mm (E110A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 300mm (E112A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 400mm (E116A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 450mm (E118A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 500mm (E120A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 600mm (E124A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

© 2017 All Rights Reserved Buckleys (UVRAL) Ltd