Buckleys International Testing Products

Call us on +44 (0)1303 278888

PST-100 110V AC spark tester - complete kit

Part Number: 6000-0003

Product Features

  • Lightweight
  • Mains powered
  • Adjustable output voltage
  • Coating thicknesses of between 3mm and 30mm can be tested
Download A Brochure

The PST-100 110V high frequency hand-held AC spark tester provides a quick and cost effective method of inspection on thick coatings and linings. Coating thicknesses of between 3mm and 30mm can be tested.

The PST-100 is widely used for testing butt-welded and overlap joints in the plastics and rubber, petro-chemical and pipeline construction industries. The PST Accessory Kit has been specially designed to offer a complete testing solution for most applications.

Other sizes and types of electrodes can be supplied if required. However, to ensure the stability of the output voltage, large electrodes should not be used. The recommended maximum electrode size is 150mm.

Complete kit comprises:

  • PST-100 110V detector unit
  • Executive-style case
  • Spark gap setter
  • Flexible probe electrode
  • Pointed probe electrode
  • Drum brush electrode
  • 2 x 332mm insulated extension rods
  • Gauze mesh electrode
  • 150mm phosphor bronze brush electrode
  • Electrode adaptor
  • Operating instructions
  • Output voltage range: 10-55kV
  • Output: pulsed ring
  • CE compliant
  • Mains voltage: 110V AC 50/60Hz
  • Weight (unit only): 1.05Kg
  • Dimensions (unit only): 6cm x 20cm x 27cm 
  • Packed weight (accessory kit): 3.5Kg
  • Dimensions (packed): 50cm x 14cm x 37cm
  • Commodity code: 9027801700

Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.

No questions are available at this time.

Be the first to ask!



Straight phosphor-bronze brush - 45° - 100mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

100 mm Phosphor-Bronze Brush Flat Backing

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.*Maximum length recommended for use with AC equipment is 150mm. ...

Straight phosphor-bronze brush - 45° - 150mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

150 mm Phosphor-Bronze Brush Flat Backing

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. *Maximum length recommended for use with AC equipment is 150mm ...

Straight silicone rubber - 100mm - 45°

They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straightonto the test probe handle. *Maximum length recommended for use with AC equipment is 150mm ...

Straight silicone rubber - 100mm

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment. They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor, straight onto the test probe ...

Straight silicone rubber - 150mm - 45°

They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straightonto the test probe handle. *Maximum length recommended for use with AC equipment is 150mm ...

Gauze mesh electrode - 250mm

250mm wide gauze mesh Suitable for testing rubber sheets - rubbing the electrode with French chalk will mark the location of the fault.   ...

Gauze mesh electrode - 128mm

Gauze Mesh Electrode is 128mm wide at 45° and suitable for testing rubber sheets. Rubbing the electrode with French chalk will mark the location of the fault. ...

Pointed probe - 75mm long

75mm long pointed probe used for testing recesses or small areas.   ...

Flexible probe - 150mm long

150mm long flexible probe used for testing around corners and overlaps.   ...

Stainless steel drum-brush 150mm

150mm long stainless steel drum-brush used for checking irregular shaped objects.   ...

L-shaped electrode - 150mm

280mm x 150mm leg Useful for testing large areas with a Spark Tester but can be used with DC units. ...

Straight phosphor-bronze brush - 45° - 200mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

© 2019 All Rights Reserved Buckleys (UVRAL) Ltd