Buckleys International Testing Products

Call us on +44 (0)1303 278888

PST-100 110V AC spark tester - basic kit

Part Number: 6000-0015

Product Features

  • Lightweight
  • Mains powered
  • Adjustable output voltage
  • Coating thicknesses of between 3mm and 30mm can be tested
Download A Brochure

The PST-100 110V Spark Tester provides a quick and cost effective method of inspection on thick coatings and linings. Coating thicknesses of between 3mm and 30mm can be tested.

It is widely used for testing butt-welded and overlap joints in the plastics and rubber, petro-chemical and pipeline industries. It can be widely used for testing butt-welded and overlap joints in the plastics & rubber, petro-chemical and pipeline construction industries.

A flexible probe is included with the unit but additional insulated extension rods and electrodes can be supplied if required. However, to ensure the stability of the output voltage, large electrodes should not be used. The recommended maximum size is 150mm.

A specially designed accessory kit is available which includes an executive-style carrying case and a range of electrodes suitable for use with the PST Spark Tester (see data sheet T53).

Basic kit comprises:

  • PST-100 110V unit
  • 150mm long flexible probe electrode
  • Operating instructions
  • Output voltage range: 10 - 55kV
  • Output: pulsed ring
  • CE compliant
  • Mains voltage: 110V AC 50/60 Hz (Ref: T52B)
  • Weight (unit only): 1.05Kg
  • Dimensions (unit only): 3cm x 20cm x 27cm
  • Packed weight (basic kit): 1.2Kg
  • Dimensions (packed): 10cm x 39cm x 33cm
  • Commodity code: 9027801700

Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.

There are no questions available at this time

Be the first to ask!



Straight phosphor-bronze brush - 45° - 100mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

100 mm Phosphor-Bronze Brush Flat Backing

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.*Maximum length recommended for use with AC equipment is 150mm. ...

Straight phosphor-bronze brush - 45° - 150mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

150 mm Phosphor-Bronze Brush Flat Backing

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. *Maximum length recommended for use with AC equipment is 150mm ...

Straight silicone rubber - 150mm - 45°

They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straightonto the test probe handle. *Maximum length recommended for use with AC equipment is 150mm ...

Straight silicone rubber - 100mm - 45°

They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straightonto the test probe handle. *Maximum length recommended for use with AC equipment is 150mm ...

Straight silicone rubber - 100mm

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment. They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor, straight onto the test probe ...

Gauze mesh electrode - 250mm

250mm wide gauze mesh Suitable for testing rubber sheets - rubbing the electrode with French chalk will mark the location of the fault.   ...

Gauze mesh electrode - 128mm

Gauze Mesh Electrode is 128mm wide at 45° and suitable for testing rubber sheets. Rubbing the electrode with French chalk will mark the location of the fault. ...

Pointed probe - 75mm long

75mm long pointed probe used for testing recesses or small areas.   ...

Flexible probe - 150mm long

150mm long flexible probe used for testing around corners and overlaps.   ...

Stainless steel drum-brush 150mm

150mm long stainless steel drum-brush used for checking irregular shaped objects.   ...

L-shaped electrode - 150mm

280mm x 150mm leg Useful for testing large areas with a Spark Tester but can be used with DC units. ...

Straight phosphor-bronze brush - 45° - 200mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

© 2019 All Rights Reserved Buckleys (UVRAL) Ltd